1000 Series Lever Handle
Disc Tumbler
Can be Materkeyed
For Metal or Wood Application
Material: Pressure Cast Handle, Steel Zinc Plated Spindle
Operation: Furnished for one, two or three point locking, right or left hand doors, with 90 or 180 degrees rotation (90 degreed RH regularly furnished)
· 90 degree RH handles rotate counter clockwise from 12 to 9 o'clock
· 90 degree LH handles rotate clockwise from 12 to 3 o'clock
· 180 degree handles are reversible for RH or LH doors
· Key is removable in locked or unlocked position for either 90 or 180 degree handles
Cam Positioning: Square spindle allows cams to be mounted at 12, 3, 6, and 9 o'clock
Rods and Guides: Not furnished
Spindle Length: Regularly furnished 25/32" and 3 1/2" long (measured from back of escutcheon). Also available in 1/4" increments from 1" to 3 1/2".
Surface Mounting: In addition to mounting shown, handles are available with attaching holes through face of escutcheon for suface mounting - 1 1/2" c. to c., countersunk for #10-32 screws. When ordering, suffix S to number (1001S). Screws not furnished.
Rekeying: Plug removal access hole added to shank of handle to allow for removal of plug assembly for rekeying purposes. To remove plug, insert key and rotate 90 degrees. Insert small tool (e.g., paper clip) in access hole and depress retainer while pulling key and plug out of handle.
Can be Materkeyed
For Metal or Wood Application
Material: Pressure Cast Handle, Steel Zinc Plated Spindle
Operation: Furnished for one, two or three point locking, right or left hand doors, with 90 or 180 degrees rotation (90 degreed RH regularly furnished)
· 90 degree RH handles rotate counter clockwise from 12 to 9 o'clock
· 90 degree LH handles rotate clockwise from 12 to 3 o'clock
· 180 degree handles are reversible for RH or LH doors
· Key is removable in locked or unlocked position for either 90 or 180 degree handles
Cam Positioning: Square spindle allows cams to be mounted at 12, 3, 6, and 9 o'clock
Rods and Guides: Not furnished
Spindle Length: Regularly furnished 25/32" and 3 1/2" long (measured from back of escutcheon). Also available in 1/4" increments from 1" to 3 1/2".
Surface Mounting: In addition to mounting shown, handles are available with attaching holes through face of escutcheon for suface mounting - 1 1/2" c. to c., countersunk for #10-32 screws. When ordering, suffix S to number (1001S). Screws not furnished.
Rekeying: Plug removal access hole added to shank of handle to allow for removal of plug assembly for rekeying purposes. To remove plug, insert key and rotate 90 degrees. Insert small tool (e.g., paper clip) in access hole and depress retainer while pulling key and plug out of handle.